JST-420W 4 Door Access Control Controller

  
* Please read using Adobe Reader 9.0 and above

📌Features

Control maximum 4 Wiegand readers.
31,000 card capacity. Each card allows 4 digits PIN code.
190,000 history record capacity.
Standalone or PC on line.
Built-in clock and calendar.
Built-in Watch Dog. The system never hang.
Built-in RS232/RS485 Interface. TCP/IP is optional.
Support 8 time zones, 3 schedules per time zone.
Programmable door delay close time is 1 to 255 seconds. If the door remains open after set time, the alarm will be triggered.
Data is protected even after power failure.
With 8 relays NO/NC output.
With 8 D/I digital inputs.
With a buzzer.
With 12 LED indicators. 8 of them show each relay’s ON/OFF status. The other 2 show the communication status between the controller and the PC.
With a reset button to reset the controller.
With ISP function to update the controller’s firmware.
Controller ID is programmable on the controller.
With an emergency dry contact to unlock all controlled electric bolts when alarm is triggered.
Operation mode: Card only, Card + PIN, PIN only, Facility Code Only, Opening or Inhibit Access.
Used with Wiegand readers or with I/O board for remote control use.

📌Specifications

. Power :    75W Switching Power (UL, CB, CCC approved)
     Input: AC 100~240VAC
     Output: 12VDC

. Keypad:  4 x 4 keys

. LCD   : 16 x 2 Character

. Operating Temperature: 0℃~60℃

. Humidity: 20%~90% RH

. Output point: 8 Relay with NO/NC output

. Dimension: 290(L) x 240(W) x 78(H)mm

📌Download